At Aurastone, we understand that proper installation is key to bringing out the beauty, performance, and durability of our premium products.
Whether you’re working with tiles, ledge panels, metallic surfaces, or translucent collections, following the correct installation process ensures a flawless, long-lasting finish.
Here’s a step-by-step guide to help you install our products with confidence.

1. Preparation

Before you begin installation, it's important to properly prepare the surface and environment:

• Surface Check: Ensure the surface is clean, dry, level, and free from dust, grease, or loose materials.

• Layout Planning: Pre-plan the layout to minimize cuts and ensure symmetrical placement, especially in feature areas.

• Environmental Conditions: Install in a dry, well-ventilated area. Avoid installation during extreme temperatures.

Tip: Dry-lay tiles or panels first to visualize the final look before applying adhesive.

2. Tools and Materials Needed

• Notched trowel

• Tile spacers

• Tile cutter or wet saw

• Level

• Rubber mallet

• Adhesive suitable for tile or stone

• Grout (if applicable)

• Cleaning sponge and bucket

Note: Always use adhesives and grouts recommended for the specific type of tile or panel material.

3. Installation Steps

a. Applying Adhesive:
Use a notched trowel to evenly spread adhesive on the substrate. Apply only enough adhesive for a few tiles at a time to prevent drying.

b. Laying Tiles/Panels:
Place the tile/panel firmly onto the adhesive bed with a slight twisting motion.
Use spacers to maintain even joints if needed. Tap gently with a rubber mallet to ensure full contact.

c. Checking Alignment:
Constantly check the alignment with a level. Adjust immediately before the adhesive sets.

d. Cutting Tiles/Panels:
Measure carefully and use a tile cutter or wet saw to make precise cuts for edges and corners.

4. Grouting (for Tiles)

After the adhesive has set (typically 24 hours):

• Remove spacers and clean joints.

• Apply grout using a rubber float, pressing it firmly into joints.

• Wipe off excess grout with a damp sponge before it dries on the tile surface.

• Allow the grout to cure as per manufacturer’s instructions.

5. Cleaning and Sealing

• After installation, clean the surface with a non-acidic cleaner suitable for your tile or panel material.

• For natural stone or porous materials, apply a high-quality sealer to protect against stains and moisture.

• Regular maintenance ensures the lasting beauty and performance of your installation.

6. Special Notes

• For Ledge Panels: Start from the bottom row and build upward for better support.

• For Metallic/Translucent Products: Handle with care to avoid surface scratches. Use soft cloths and avoid abrasive materials.

• Outdoor Installations: Ensure proper drainage and waterproofing to withstand weather elements.

Final Thoughts

A flawless installation brings out the true character of your chosen Aurastone products.
We recommend professional installation for best results, especially for complex designs, large panels, or specialty collections like Metallic and Translucent.
By following this guide and using the right materials, you can create stunning, enduring spaces that reflect your unique vision.

For detailed technical specifications or personalized assistance, please contact the Aurastone support team. We’re here to help!